Liquid WaterproofingLiquid Waterproofing

Liquid Waterproofing

Injection Waterproofing

HIGH PRESSURE STRUCTURAL POLYMER INJECTION

About Structural Polymer Injection Waterproofing

Injection Waterproofing Applications

Low to high pressure structural polymer injection waterproofing and sealing.


Basements
Lift Shafts
Any Underground Structure
Silos
Dams
Retainer Walls
Rising Damp
Concrete & Tiled Decks
Concrete Roof Slabs
Cracks in Concrete
Expansion & Construction Joints
Window & Door Frames

Benefits of Injection Waterproofing


Non-invasive - No need to chop tiles, break walls or excavate
Seamless membrane within the structure, blocking all porous areas and pathways
Particle size less than 1 Micron - extremely permeating
Saves cost due to the remarkable spread of Polymer grout - even at low injection pressure
Does not wash out during sealing - Stops leaks of 200 L/sec successfully
Exceptional performance under high pressure - successfully sealed static head of 20,000 kPa
Curing chemically controlled from several seconds to 48 hours
Seals saline and hypersaline water effectively
Remains flexible once solidified and will not re-leak with ground movement (400% elasticity.
- Reaction is not exothermic - no expansion effect
Environmentally friendly - non hazardous

How It's Done


Depending on the structure and products used, a series of 5mm, 10mm and 16mm holes will be drilled into the structure to the target depth.

After successful testing of the holes, the applicable product will be injected with specially designed injectors to form a seamless membrane within the structure, blocking all porous areas and pathways.

Drilled holes will be re-filled or grouted.

Our Company is proud to be using our own developed and patented chemicals, providing a service where we will guarantee to control and manage your water infiltration problems.


Before Injection Waterproofing

SENWES SILO

After Injection Waterproofing

SENWES SILO

Polymer Injection Products

Stacks Image p62241_n4

POLY2FLEX (P100)


Poly2Flex can be classified as an emulsion grout. It is a patented polymer blend mixed with additives to promote flow and adhesion. It contains no toxic or hazardous materials other than 0.5% ammonia solution, which is present as a preservative but evaporates within minutes.

The reaction of Poly2Flex with water depends on the characteristics of the water, such as pH, salinity, mineral content, temperature etc.

The formulation of Poly2Flex can be varied to achieve the desired reaction with the specific water being treated. It is therefore essential to carry out tests with water from the area to be treated prior to finalising the formulation.

The rate of water flow as well as the texture of the flow area also influences the selection of the appropriate formulation of Poly2Flex.


High flows through large fissures or cracks require stability to achieve better penetration into the aquifer or crack before coagulation. Each case differs.

Poly2Flex can be used under very high pressures and are only limited by the grout pumps itself. Pressures of up to 50 Bar can easily be achieved.

Poly2Flex emulsion is also solidified with a chemical activator. Poly2Flex can be used in wet or dry conditions.


Stacks Image p62241_n9

DUALFLEX (HE100)


DualFlex is a dual component urethane and polymer based resin that reacts rapidly with equal proportions of water to form a flexible, impermeable foam with excellent adhesion to concrete and rock.


DualFlex is a low viscosity chemical grout primarily injected into the area of leakage, creating a mechanical and chemical bond, as well as a compression seal.

The cured resin is flexible and will resist degradation through thermal expansion and contraction, wet and dry cycles, and freeze and thaw cycles for long periods.

DualFlex is designed to fill and waterproof larger passages and honeycombing in structures and large cracks or joints in concrete

Excellent to fill and seal medium to large inaccessible areas in structures.


Stop infiltration through sewage systems, 
storm and drain culverts, manholes, utility vaults, large-diameter pipe or similar structures. 
Excellent for waterproofing in tunnels, elevator pits, dams, reservoirs, etc.


DualFlex can be used in wet or dry conditions. 



Loading…
Loading…

POLYMER DEMONSTRATION


Loading…
Loading…

RETAINING WALLS


Loading…
Loading…

RISING DAMP


Loading…
Loading…

PATIOS



You have done an excellent job at my property. It has been a year now and it seems you have solved my (leak) problem. I will gladly refer others to you


Danie - Hout Bay

Injection Waterproofing Applications

Stacks Image 62141

Silos

WATERPROOFING
GAS SEALING


Not only will we stop water ingress at small persistent areas, but we can also provide turnkey solutions for your water ingress in tunnels, round hoppers, through silo floors and walls. In addition to stopping water either above or below ground level, we can also pressure clean the interior of tubes to enable us to provide accurate pricing on repairs and internal gas sealing and waterproofing.


Stacks Image 61986

Underground Structures

WINE CELLARS
BASEMENTS
LIFT SHAFTS
VALVE CHAMBERS


No need to excavate around your structure to re-apply or repair traditional membranes. Simply seal floors, retaining walls and joints with high-pressure chemical structural injection from the interior of the structure. Guaranteed.


Stacks Image 62057

Cracks in Concrete

PARKING DECKS
COFFER CASTINGS
CONCRETE ROOF SLABS
RETAINER WALLS
CONCRETE COLUMNS


Structural repair and permanent water sealing of cracks and joints in concrete, made fast and permanent with high-pressure chemical injection waterproofing.


Stacks Image 62026

Frames

WINDOW AND DOOR FRAMES
ALUMINIUM FRAMES
WOODEN FRAMES


Only perfectly installed frames will withstand moisture or rain ingress. A fast, effective and guaranteed method of sealing these frames can be done with chemical injection waterproofing, without removing any frames.


Stacks Image 62032

Roof Slabs

CONCRETE ROOF SLABS


As long as your torch-on membrane is still in reasonable condition, injection waterproofing will stop future water leakage problems, without replacing the existing membrane. Fast, effective and guaranteed.
Alternatively we shall replace the old membrane with a new Polyurea membrane.


Stacks Image 62063

Retainer Walls

CONCRETE WALLS
REINFORCED CONCRETE WALLS
DOUBLE SKIN WALLS


Remedial injection waterproofing in walls, targeting cavities, honeycombing in casted concrete and cracks will prevent future water ingress into the core of the structure. That is without any structural changes.


Stacks Image 62051

Joints

EXPANSION JOINTS
CONSTRUCTION JOINTS


Chemical injection sealing of expansion joints will prevent future water ingress into the core of the structure. Sub-soil joints easily treated from the interior of the building.


Stacks Image 61998

Concrete & Tiled Decks

TILED PATIOS
PARKING DECKS
PAVED DECKS


Unless you would like to replace your tiles, a fast and effective injection waterproofing solution will take care of your water ingress problems without removing any tiles or pavers.


Stacks Image 62038

Cavity Walls

CAVITY SEALING
RISING DAMP


Cavity wall waterproofing is a two part process. Cavity will first be primed with Poly2Flex and then filled with closed cell SPF to fill the cavity and provide insulation.


LIQUID WATERPROOFING GAUTENG


+27(0)12 205 1812
+27(0)82 415 2081
+27(0)72 296 9372

val@liquidwaterproofing.com

CAPE LIQUID WATERPROOFING


+27(0)21 887 1857
+27(0)82 330 2089
+27(0)82 5588 337

tania@clwp.co.za

NATAL LIQUID WATERPROOFING


+27(0)12 205 1812
+27(0)82 415 2081
+27(0)83 771 5093

val@liquidwaterproofing.com

Stacks Image p62086_n3