CAPE LIQUID WATERPROOFING (PTY) LTD
PO Box 1571 Stellenbosch 7599
+27(0)865 22 1119
+27(0)21 887 1857
+27(0)82 330 2089
Leaders in modern technology solutions
Providing proven solutions for failed traditional waterproofing methods
Far less intrusive remedial solutions to existing water ingress
Much quicker compared to alternative conventional waterproofing
Addressing the sources of the ingress problem, the results can be far more accurate and measured.
Liquid Waterproofing Services
Only with pleasure, would I recommend you to friends as I appreciate your efficient and pleasant way of working
Monique - Durbanville
About Cape Liquid Waterproofing
With more than 4000 Case Studies , Cape Liquid Waterproofing have accumulated a wealth of experiences with regards to waterproofing problems in general but, more specific on chemical injection waterproofing, polyurea spray application and re-lining of concrete and steel pipes.
Focusing on solving water ingress through chemical injection waterproofing and polyurea coatings, with case studies ranging from construction & expansion joints on large commercial properties to solving water ingress of tiled concrete patios.
From rising damp in foundations of residential properties, to ingress damage to aluminium door and window frames, it is with this in-depth knowledge dedication that Cape Liquid Waterproofing can provide you with a qualified opinion, fast.
Cape Liquid Waterproofing would be able to quickly evaluate which type of polymer application is the solution for your water ingress problem.
Our competent experienced personnel will evaluate your problem areas, and submit a turnkey solution at no cost, if your problem can be solved using our expertise and products. .
Always aim to solve the source of the water ingress and the not the symptom
Provide the best turnkey solution with injection waterproofing, polyurea coatings or both where applicable
Make sure the size of the scope of work will eliminate all possible sources of ingress
Attention to detail will almost always ensure 100% success ratio on a waterproofing project
It is with these principals in mind that Cape Liquid Waterproofing can provide clients with a wide range of water ingress solutions. Just simple straight forward advice with results through experience which will save the client not only time and money, but provide guaranteed results.
With a well defined and identified water ingress problem, Cape Liquid Waterproofing would be able to share some hard earned advice.
You have done an excellent job at my property. It has been a year now and it seems you have solved my (leak) problem. I will gladly refer others to you
Danie - Hout Bay
Clients and Areas in Western Cape
Murray & Roberts Construction
Group 5 Construction
Stephanotis Stocks Construction
J Van Der Sluys Construction
W Voigt Properties
Broll Property Management
Old Mutual Properties
Diamond Property Group
Waterfront Property Management
The Property Management Company
DevPark Property Management Company
JDR Construction Company
Green Griffin Property Group
Some of the Top Architect Companies in Cape Town
Some of the Top Project Managers in Cape Town
Some of the Top Engineering Companies in Cape Town
Some of Cape Town best Property Consultants
All the major Real Estate Agencies, ReMax, Pam Golding, Seeff, etc...
Some of Cape Town most prestigious private residential properties with more than 1000 private individuals including properties in:
Camps Bay, Clifton, Bantry Bay
Sea Point, Gardens, Higgovale
Claremont, Rondebosch, Constantia
Tokai, Muizenberg, Fishhoek
Simons Town, Kommetjie, Blouberg
Bloubergstrand, Melkbos, Yzerterfontein
Milnerton, Kloofnek, Vredekloof
Green Point, Fresnaye, Kenilworth
Wynberg, Kirstenbosch, Noordhoek
Stellenbosch, Somerset West, Gordons Bay
Strand, Betty's Bay, Rooi Els
Pringle Bay, Hermanus, Kleinmond
Grabouw, Franshoek, Paarl
Pniel, Bellville, Durbanville
We have been very happy with the prompt and professional way in which you have attended to the problem and I have in fact mentioned and recommended you to some of my friends
Horst - Claremont
How does your 10 Year Guarantee Work?
It is simple. As long as you don't alter the structure or interfere with our products, we shall repair those areas defined in your scope of work, for a period of 10 years after completion.
How successful is your injection waterproofing system?
Very successful. Please see our client's references. The advantage with our system is that once we've treated an area, and there is still a small leak somewhere, we do not need to redo the entire area. At most we need to re-visit that specific spot to cure the problem. Hence our guarantee that makes provision for that.
Is the written Guarantee transferrable to a new owner?
Yes. Please let the new owner of the building contact us for verification.
Do you need to remove the tiles, screed and membrane to stop my leak?
No. Unlike traditional waterproofing methods, we don't need to chop up your tiles, screed and defective membrane.
We simply drill 5mm holes in the grout, between your tiles, and pressure inject Poly2Flex into the porous screed layers.
What if the tiles are butt joined? How will you solve that?
We can drill 5mm holes on the corners of each tile, and re-grout the drilled holes to match the surrounding tiles. We have done numerous sites with marble, granite and other tiles like this.
How are cavity walls treated?
Cavity walls are injected with different products, depending on the size of the cavity. Holes from 10mm to 16mm are drilled into the cavity, and the cavity filled to a pre-defined height.
This will effectively stop water migration through the cavity up to the defined height.
How long do I need to wait before redecorating the affected areas?
That will all depend on the severity of the leak and the volume of water and level of saturation in the affected structure. Humidity levels and volume of air circulation around the structure will also influence the drying-out -period.
As a rule of thumb expect to wait at least 8 weeks before redecorating walls as a first phase with a non-waterproof PVA paint.
This will allow the structure to 'breathe' while providing a perfect means to see if any more 'new' moisture is evident.
Please keep in mind that although we can stop future moisture migration, the moisture currently in the structure needs to dry out, and the sooner you paint, the more blistering you'll find. Hence the cheap PVA and then later, once the structure shows no more blistering, you can apply your final coat.
If you're impatient, a rental dehumidifier will speed up the process significantly, especially where air circulation is less, e.g. basements and cellars.
LIQUID WATERPROOFING GAUTENG
+27(0)12 205 1812
+27(0)82 415 2081
+27(0)72 296 9372
CAPE LIQUID WATERPROOFING
+27(0)21 887 1857
+27(0)82 330 2089
+27(0)82 5588 337
NATAL LIQUID WATERPROOFING
+27(0)12 205 1812
+27(0)82 415 2081
+27(0)83 771 5093